Autostart – Run the application automatically when it starts – iPaper / eDocPrintPro

Some of our applications, e.g. iPaper.exe or other eDocPrintProMonitor.exe must be started automatically when the computer is started. If this is not done, however, you can check it yourself and correct it.

Normally, applications that are automatically started should be registered here:

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

If a 32bit application is to be started automatically under a 64bit drive system, this is registered here:

  • HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Run

Example iPaper:

Autostart von 32bit Anwendungen auf 64bit OS

Example eDocPrintPro incl. Additionally attached printer “Test”:

Autostart von 64bit Anwenduingen auf 64bit OS

FileConverterPro (FCpro) – Installation requirements from version 1.0.54

With the FCpro installation from version 1.0.54, changed installation requirements are checked – if these are fulfilled, these installation steps are skipped by the setup and are not executed.

The following components are tested and, if necessary, subsequently installed:

If these components already exist, they are not reloaded and only FCpro is installed. If all or individual components are not available or not in the appropriate version, the FCpro Setup tries to load them from our FTP server and install them. That is, If an installation should be made without an Internet connection, the setups of these components should be downloaded beforehand and installed in this order.

The FCpro settings and the license remain unchanged / update to the new version.

Download – FileConverterPro (FCpro) ~190MB >>>

FileConverterPro (FCpro) – Version 1.0.54 available

Innovations FCpro Version 1.0.54:

HiQ – HTML to PDF conversion – Browser size configurable:

  • For the HiQ-HTML to PDF conversion, a “virtual browser” is used internally for the rendering of the HTML pages. Depending on the window size of the browser, HTML pages are displayed differently with regard to format / wrap / margins, etc.. This is why the window size of the browser affects the PDF generated during the conversionFor this reason, there is now a parameter for both the optimal window size to be determined automatically or to specify a fixed browser window width in pixels. The internal default value is 800 pixels.

FCpro - Neue Option - HTML Konvertierung - Browser Größe & Breite setzen

iOCR – PDF rendering resolution configurable:

  • Since only image / image documents can be processed by OCR, PDF documents are always subjected to an image (rendering) prior to OCR processing. The PDF rendering is done with a predefined resolution – so far 300dpi for BW and 150dpi for color. However, the default value of 150dpi is not sufficient to always achieve a good OCR detection rate. Therefore, it is now possible to configure the rendering resolution for BW and color, with the default value for color now being 300dpi.

iOCR - Option - PDF Rendering resolution for b&w and color

Support for additional MS-Office formats:

  • E.g. DOTX: The new version now also includes all MS-Office templates. E.g. DOTX over their file extensions or via the MIME types.

FCpro - Supported File Extensions & MIME Types #1 FCpro - Supported File Extensions & MIME Types #2 FCpro - Supported File Extensions & MIME Types #3 FCpro - Supported File Extensions & MIME Types #4 FCpro - Supported File Extensions & MIME Types #5 FCpro - Supported File Extensions & MIME Types #6 FCpro - Supported File Extensions & MIME Types #7

Download – FileConverterPro (FCpro) ~190MB >>>

eDocPrintPro Tools – Version 3.24.8 available

Innovations eDocPrintPro Tools Version 3.24.8:

The tools eDocPrintProUtil.exe and ApplyEsf.exe have been modified. The file extensions for eDocPrintPro profile files have changed in an eDocPrintPro predecessor version from ESF to ESFX, which means that an adaptation was required. With the new tools, ESFX profiles can now be loaded interactively or loaded and activated via command line parameters.

The parameters / LOAD and / APPLY have been added to ApplyEsf.exe. With / LOAD the profile is only selected, but not loaded, while / APPLY selects the profile and loads it at the same time.

  • eDocPrintProUtil.exe Command line example to create 2 additional printers, load and activate an ESFX profile, and lock the user interface of the printer.

Beispiel für eDocPrintProUtil Anwendung

  • ApplyEsf.exeExample to load and activate ESFX profiles:

ApplyEsf.exe - Beispiel um Profile zu laden und zu aktivieren

 

Download – eDocPrintPro Tools >>>
Download – ReadMe – eDocPrintPro Tools >>>